Numerical Analysis of Broadband Noise Generated by an Airfoil with Spanwise-Varying Leading Edges

Here, the single-target parameterization of alternatives to leading-edge noise is carried out using analytical models based on the Wiener-Hopf technique. Four leading-edge serration profiles with different frequencies, amplitudes, and phases are implemented to aid the understanding of sound suppression mechanisms. The effects of the serrated shape factor, wavelength, and amplitude are analyzed at tip-to-root ratios of 0.5, 1, and 2, respectively. An effective double-wavelength sinusoidal serration design can substantially reduce the noise emissions of 5.2 dB at h¯ = 2. Additionally, compared to single-wavelength serrations, an additional 1.47 dB noise reduction effect can be obtained by double-wavelength serrations under the appropriate design parameters. The surface pressure and phase distribution of different spanwise-varying leading edges indicate that the phase interference effect affected by source-radiated noise reduction is enhanced by this serration at the hills for serrations with a small curvature, and noise emission in the low-frequency band is more effectively suppressed. The sharper the serration is, the more conducive it is to a reduction in high-frequency noise. Nevertheless, the effectiveness of serrations is usually partially limited by the non-negligible trailing-edge self-noise. The sound source intensity of the root is decreased by the ogee-shaped serrations with a large curvature transition. A secondary noise reduction mechanism with a local source cut-off effect caused by nonlinearity is demonstrated.