Related Experiment Video
Updated: Jun 24, 2025

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
Hybrid FOT2F-FOPD controller for permanent magnet synchronization motor based on ILA optimization with SRF-PLL
Mohamed Nouh1, Belal A Zalam1, Amged Sayed2,3
1Department of Industrial Electronics and Control Engineering, Faculty of Electronic Engineering, Menoufia University, Menouf, Egypt.
Abstract:
Permanent magnet synchronous motor (PMSM) systems have gained popularity in various fields due to their advantages such as high speed, high accuracy, low maintenance, and high reliability. This paper presents the speed tracking control of a permanent magnet synchronous motor (PMSM) using a hybrid fractional order PI and type 2 fuzzy control with fractional order PD control (FOT2F-FOPD). The SRF-PLL observes the motor speed and estimates the rotor's position by interpreting the input voltages of the motor instead of using a sensor. Then, the controller parameters (gain, μ and λ) are tuned based on a novel optimization algorithm called Incomprehensible but Intelligible-in-time (IbI) Logics algorithm (ILA). The proposed controller enhances the performance of the system and regulates the speed of the motor under parameter variations such as the speed and the load. So, the proposed ILA (FOT2F-FOPD) controller is assessed using MATLAB/Simulink simulation and compared with other controller techniques. The proposed technique reduces the settling time, steady state error and overshoot by at least 65%, 54% and 53% respectively under load conditions compared with (PSO, optimized FOPD, FOPI and PI). While at no load condition, the settling time and the error are reduced by 31% and 12.5% respectively with no overshoot in output response. The results show a significant improvement in the performance of motors used with the application of the proposed controller and the employment of the (ILA) optimization compared with FOPI and PI controllers.
More Related Videos
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
11:53The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Torque On A Current Loop In A Magnetic Field
Consider a rectangular current-carrying loop containing N turns of wire, placed in a uniform magnetic field. The net force on a current-carrying loop...
PI Controller: Design
Phase-lead and Phase-lag Controllers
PID Controller