Related Experiment Video
Updated: Jun 24, 2025

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
Low Temperature (Down to 6 K) and Quantum Transport Characteristics of Stacked Nanosheet Transistors with a
Xiaohui Zhu1,2,3, Lei Cao1,2,3, Guilei Wang4
1Integrated Circuit Advanced Process R&D Center, Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China.
Abstract:
Silicon qubits based on specific SOI FinFETs and nanowire (NW) transistors have demonstrated promising quantum properties and the potential application of advanced Si CMOS devices for future quantum computing. In this paper, for the first time, the quantum transport characteristics for the next-generation transistor structure of a stack nanosheet (NS) FET and the innovative structure of a fishbone FET are explored. Clear structures are observed by TEM, and their low-temperature characteristics are also measured down to 6 K. Consistent with theoretical predictions, greatly enhanced switching behavior characterized by the reduction of off-state leakage current by one order of magnitude at 6 K and a linear decrease in the threshold voltage with decreasing temperature is observed. A quantum ballistic transport, particularly notable at shorter gate lengths and lower temperatures, is also observed, as well as an additional bias of about 1.3 mV at zero bias due to the asymmetric barrier. Additionally, fishbone FETs, produced by the incomplete nanosheet release in NSFETs, exhibit similar electrical characteristics but with degraded quantum transport due to additional SiGe channels. These can be improved by adjusting the ratio of the channel cross-sectional areas to match the dielectric constants.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Field Effect Transistor

