Cross-Scale Industrial Manufacturing of Multifunctional Glass Fiber/Epoxy Composite Tubes via a Purposely Modified...

In the present research work is demonstrated a cross-scale manufacturing approach for the production of multifunctional glass fiber reinforced polymer (GFRP) composite tubes with a purposely redesigned filament winding process. Up until now, limited studies have been reported towards the multiscale reinforcement direction of continuous fibers for the manufacturing of hierarchical composites at the industrial level. This study involved the development of two different multi-walled carbon nanotube (MWCNT) aqueous-based inks, which were employed for the modification of commercial glass fiber (GF) reinforcing tows via a bath coating unit in a pilot production line. The obtained multifunctional GFRP tubes presented a variety of characteristics in relation to their final mechanical, hydrothermal aging, electrical, thermal and thermoelectric properties. Results revealed that the two individual systems exhibited pronounced differences both in crushing behavior and durability performance. Interestingly, for lateral compression the MWCNT coatings comprising a polymeric dispersant minorly affected the mechanical response of the produced tubes. The crashworthiness indicators of the multifunctional tubes displayed a slight 5% variation to the respective reference values, combined with a more ductile behavior. Moreover, regarding the bulk electrical and thermal conductivity values, as well as the Seebeck coefficient factor, the corresponding tubes displayed a variance of 233% and 19% and an opposite semi-conducting sign denoting a p- and n-type character, respectively.