A method to design a fast chaotic oscillator using CCTA

This article introduces a novel method for designing a fast chaotic oscillator using a CCTA (Current Conveyor Transconductance Amplifier) based on Chua's circuit. The proposed method uses innovative configurations and advanced simulation techniques to overcome challenges in high-speed operation, nonlinear dynamics, and Analog Building Block (ABB) selection. The design begins with nonlinear negative resistance, essential for Chua's diode characteristics, including two negative resistances, NR₁ and NR₂. The circuit integrates one CCTA block, two grounded capacitors, two fixed resistors, one inductor, and one potentiometer. It is simulated using PSPICE with IC (Integrated Circuit) macro-models and 180nm CMOS (Complementary Metal Oxide Semiconductor) technology. Various chaotic waveforms and attractors are produced, validating the theoretical and mathematical predictions. By varying the resistance values (1450Ω, 1650Ω, 1800Ω, 1950Ω), the circuit exhibits different chaotic behaviors, such as large limit cycles, double-scroll attractors, Rossler-type attractors, and I-periodic attractors. FFT (Fast Fourier Transform) analysis confirms the highest dominant operating frequency of 37.5MHz. A Monte Carlo simulation with 100 runs shows maximum voltage variations in the chaotic waveforms of 5.21 % and 4.61 % across the capacitors, demonstrating robustness and reliability. This design offers significant advancements in implementing high-frequency chaotic oscillators, with potential applications in various fields requiring chaotic signal generation.•A novel design of Chua's diode and Chua's chaotic oscillator using only one CCTA block is presented in this paper.•The proposed chaotic oscillator achieves the highest operating frequency of 37.5MHz.•The proposed circuit is simulated using commercially available ICs (MAX435 and AD844) and CMOS 180nm technology in PSPICE to confirm its workability.