Fractal evolution characteristics of fracture meso-damage in uniaxial compression rock masses using bonded block...

With regard to deep mining in metal mines, an investigation into the failure mode of deep fractured rock masses and their corresponding acoustic emission signal characteristics is conducted via uniaxial compression tests. Subsequently, a fractal damage renormalization group mechanical model is developed to explain the behavior of those fractured rock masses. Employing the bonded block model (BBM) numerical simulation method, fracture process in synthetic rock samples is analyzed, thereby validating the efficacy of the mechanical model. The numerical simulations highlight the critical role of fractures expansion in underlying the deterioration of rock mass strength. As the peak load decreases, the fracture fractal dimension increases, leading to a significant 14.2% reduction in compressive strength accompanied by an approximate 8.7% rise in average fracture fractal dimension. A comparative analysis of tetrahedral and voronoi block synthetic rock samples reveals the tetrahedral block samples exhibit a superior ability to depict the fracture behavior of fractured rock masses. Specifically, they offer a more accurate simulation of acoustic emission characteristics and failure modes. Furthermore, variations in the fracture fractal dimension with respect to the hole defect's position are observed, with the maximum value occurring along the vertical axis of the hole defect. This observation underscores the potential utility of visually monitoring deep rock fracture dynamics as an effective mean for quantitatively evaluating fracture damage and strength degradation in deep rock formations.