Improved energy method and agglomeration influence of carbon nanotubes on polymer composites

In this paper, the geometric analysis of carbon nanotubes (CNTs) without external loading is carried out by energy method. Based on the theory of molecular mechanics, an improved mechanical model is proposed to predict the energy of armchair carbon nanotubes under stress-free conditions, and the diameter of CNTs is estimated according to the principle of minimum energy. The results show that the diameter obtained by the improved model is larger, but basically consistent with that obtained by conformal mapping. The inversion energy term is added to the modified model, and the inversion energy term related to atomic curvature is characterized by the conization angle. It can be seen from the error that the inversion energy of carbon nanotubes can not be neglected in the stress-free state, especially in the case of small diameter. The agglomeration of nanotubes is one of the important factors, which affects the effective elastic modulus of nanocomposites. Here, a new micro-mechanics model consisting of both agglomeration of CNTs and pure matrix is also presented to analyze its effect on the effective elastic modulus. It is noted from the results that the stiffness of nanocomposites is very sensitive to the CNTs agglomeration.