Hydrothermal extraction of ulvans from Ulva spp. in a biorefinery approach

A simple cascade process based on the hydrothermal fractionation of Ulva spp. biomass was proposed. Considering the overall extraction yields (50 %), ulvan recovery (23 %), and ulvan composition, structural, mechanical and cytotoxic properties, the selected optimal final heating temperature was 160 °C. Ethanol precipitation provided the highest ulvan recovery yields but choline chloride precipitated ulvans showed stronger mechanical properties, G´ moduli 1.5·10⁴ Pa and 3·10⁴ Pa for ethanol and for choline chloride, respectively. Both products were safe on NCTC 929 mouse fibroblasts and after a cooling stage, formed films without requiring any additives. From the ulvan-free liquid fraction, one product with 43 % (wt, d.b.) phenolics and moderate antiradical properties and a byproduct containing nutrients and minerals were separated. The methane potential of the corresponding residual solids was influenced by the hydrothermal heating temperature and was doubled compared to than for the untreated seaweed biomass (60 mL/g VS). This scheme could be also applied to the wet algal biomass, in a chemical free alternative to provide ready to use ulvan biopolymers, bioactives, nutrients, salts and biogas, conforming a biorefinery approach.