Preparation and characterization of carboxymethyl microcrystalline cellulose from pineapple leaf fibre

Highly functional and robust biobased materials are still in research to produce valuable composites for various applications. The literature shows the gap of new raw biobased materials in market which can functionally tuned and structurally modified for development of 2d/3d architectures. Thus, in the present study, very cheap, easily available agricultural waste, pineapple leaf fiber (PL-raw) was used for the isolation of microcrystalline cellulose (PL-MCC) and further functionalized using upscaled chemical approach to carboxymethyl microcrystalline cellulose (PL-CMMCC). Very advanced techniques like Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction analysis (XRD), and differential scanning calorimetry (DSC) served to characterize the raw material, high crystalline PL-MCC, and modified carboxy methyl MCC. FTIR determined presence of different absorbed peak at approximately 1620.2 cm^-1, and at 1423.8 cm^-1, carboxyl groups were assigned to PL-CMMCC. On the other hand, the XRD findings verified that PL-CMMCC's crystalline structure has decreased. Analysis by SEM revealed a damaged surface morphology for PL-CMMCC. Following chemical treatments, the EDX analysis revealed that each fiber sample contained a highly pure cellulose elemental composition. Thus, results explain the utilization of agricultural waste, pineapple leaf fiber to high valuable products like highly crystalline PL-MCC, in addition further modification of PL-MCC could leads to formation of highly functional material that could be used for other applications too in future.