Related Experiment Video
Updated: Jun 7, 2025

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
Terahertz dual-band bandpass filter based on spoof surface plasmon polaritons with wide upper stopband suppression
Abstract:
In this paper, a terahertz (THz) dual-band bandpass filter based on spoof surface plasmon polaritons (SSPPs) with wide upper stopband suppression is proposed. The filter utilizes two types of SSPP unit cells loaded on a double-sided quasi-SSPPs transmission line to achieve dual-band filtering responses and wide upper stopband suppression simultaneously. The performance and bandwidth of the filter's passbands can be adjusted by modifying the SSPP unit cells within the dual-band filtering part. The detailed design method is provided to enhance understanding of the operating principle of the presented filter. The simulation results of the designed THz filter demonstrate its excellent dual-band filtering performance. It features a wide stopband spanning from 0.91 to 1.45 THz with |S21| < -35 dB. To validate the proposed approach, a microwave filter with a similar design is implemented. Finally, the simulated and measured S-parameter responses of the filter are provided for comparison and evaluation.
Related Concept Videos
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Active Filters

