Freeze-Cast Composites of Alginate/Pyrophosphate-Stabilized Amorphous Calcium Carbonate: From the Nanoscale...

Pyrophosphate-stabilized amorphous calcium carbonates (PyACC) are promising compounds for bone repair due to their ability to release calcium, carbonate, and phosphate ions following pyrophosphate hydrolysis. However, shaping these metastable and brittle materials using conventional methods remains a challenge, especially in the form of macroporous scaffolds, yet essential to promote cell colonization. To overcome these limitations, this article describes for the first time the design and multiscale characterization of freeze-cast alginate (Alg)-PyACC nanocomposite scaffolds. The study initially focused on the synthesis of Alg-PyACC powder through in situ coprecipitation. The presence of alginate chains in the vicinity of the PyACC was shown to affect both the powder reactivity and the release of calcium ions when placed in water (XRD, chemical titrations). In vitro cellular assays confirmed the biocompatibility of Alg-PyACC powder, supporting its use as a filler in scaffolds for bone substitutes. In a second step, the freeze-casting process was carried out using these precursor powders with varying rates of inorganic fillers. The resulting scaffolds were compared in terms of pore size and gradient (via SEM, X-ray microtomography, and mercury intrusion porosimetry). All scaffolds exhibited a pore size gradient oriented along the solidification axis, featuring unidirectional, lamellar, and interconnected pores. Interestingly, we found that the pore size and wall thickness could be controlled by the filler rate. This effect was attributed to the in situ cross-linking of alginate chains by released Ca²⁺ ions from the fillers, which increased viscosity, affecting temperature-driven segregation during the freezing step. Different multiscale organizations of the porosity and spatial distribution of fillers (FEG-SEM) were correlated with changes in the scaffold mechanical properties (tested via uniaxial compression). With such tunable porous and mechanical properties, Alg-PyACC composite scaffolds present attractive opportunities for specific bone substitute applications.