Related Experiment Video
Updated: Jul 24, 2026

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
Comprehensive techno-economic optimization and performance analysis of molten salt concentrated solar power tower
Larbi Mohamed1, Rouibah Abdelkader1, Kouider Laroussi2
1Laboratory Applied Automation and Industrial Diagnostics of University of Djelfa (LAADI), PO Box 3117, Djelfa, 17000, Algeria.
Abstract:
This paper presents a comprehensive techno-economic analysis of three molten salt Concentrated Solar Power (CSP) tower plants located in the regions of Mechria, Adrar, and Tindouf in Algeria. The study evaluates the thermal efficiency, economic feasibility, and performance of these CSP using the System Advisor Model (SAM) software, which accurately models Direct Normal Irradiance (DNI), a critical factor influencing plant performance. Key parameters analyzed include Solar Multiple (SM), Thermal energy storage (TES) hours, capacity factor (CF), and the Levelized Cost of Energy (LCOE). The results demonstrate that an optimal heliostat field configuration with a SM of 1.8 and 10 h of TES achieves a capacity factor of 51.49%, with a minimum LCOE of 0.097 $/kWh. In Mechria, with operational and maintenance costs projected at 2.51 million dollars. For the Adrar region, a SM of 1.6 and TES of 2 h yield an LCOE of 0.18 $/kWh at a capacity factor of 24.03%. Similarly, in Tindouf, a SM of 1.6 and TES of 8 h result in a capacity factor of 18.95% and an LCOE of 0.17 $/kWh. The analysis reveals that the design of CSP systems, particularly the combination of solar Multiple and TES, plays a pivotal role in optimizing the economic performance of the plants, This approach enables researchers to save time and costs by using satellite-derived DNI estimations, enhancing data accuracy and optimizing CSP deployment.
Related Concept Videos
Power Factor Correction
Transformers in Distribution System
Distribution substation transformers come in various ratings and typically use mineral oil for insulation and cooling. To prevent moisture and air from entering the oil, some transformers use an inert gas like nitrogen to fill the...
Transmission Line Design Considerations
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Turbine-Governor Control

