Related Experiment Video
Updated: May 12, 2025

Techniques for the Evolution of Robust Pentose-fermenting Yeast for Bioconversion of Lignocellulose to Ethanol
Published on: October 24, 2016
Insight into the Structure Evolution and Performance Optimization of Bi0.5Na0.5TiO3-Based Ceramics for Energy Storage
Qian Wang1,2, Lin Zhang1,2, Rui Li1,2
1School of Physics and Mechanical & Electronical Engineering, Institute for Functional Materials, Hubei University of Education, Wuhan 430205, China.
Abstract:
The excellent temperature stability and high saturation polarization of Bi0.5Na0.5TiO3 (BNT) make it a promising candidate for energy storage capacitors. However, its disadvantages, such as low breakdown strength, high remnant polarization, and a complex sintering process, limit its further development. To address this, (1 - x) Bi0.5Na0.5TiO3-x Sr(Mg1/3Nb2/3)O3 ceramics were fabricated, where ion doping was employed to modify the domain structure, reduce the grain size, and improve the energy storage performance. With the increase in dopant concentration, the evolution from long-range-ordered ferroelectric micro-domains into short-range-ordered randomly oriented polar nanoregions (PNRs) was revealed, as demonstrated by XRD and Raman spectroscopy. This resulted in a diffuse phase transition peak and a significant reduction in remnant polarization. However, the saturation polarization also decreased. Finally, the optimal energy storage performance was achieved at a medium dopant concentration (x = 0.10), accompanied by reduced grain size and a dense microstructure. This composition exhibited a discharged energy density of 1.64 J/cm3 at a low electric field of 150 kV/cm, representing a notable improvement over pure BNT, which showed a highly lossy P-E loop and a discharged energy density of only 0.14 J/cm3 at the same electric field.

