Related Experiment Video
Updated: Jan 18, 2026

Fabrication and Characterization of a Conformal Skin-like Electronic System for Quantitative, Cutaneous Wound Management
Published on: September 2, 2015
Self-Adhesive Liquid Metal Channel Patch with Tip-Guided Conformal Coupling and Leakage Suppression for Skin
Sang-Woo Lee1, Hyeonseok Song1, Jinseo Kim1
1Department of Mechanical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, 44919, Republic of Korea.
None:
Skin-interfacing electrodes are essential for wearable bioelectronics, yet conventional gel- and dry-type electrodes often suffer from dehydration, poor skin conformity, irritation, and delamination during motion, limiting their long-term performance. Here, a self-attachable liquid metal channel (S-LMC) patch is presented that integrates open-bottom Galinstan microchannels and micropillar arrays, both featuring re-entrant geometries for enhances skin adhesion and leakage suppression. A via-hole interconnect enables direct vertical signal transmission, eliminating the need for bulky wiring and facilitating compact integration. The patch achieves strong, reusable skin adhesion (>60 kPa), low contact impedance (7.35 kΩ·cm2 at 10 Hz), and minimal skin irritation. Compared to commercial Ag/AgCl gel electrodes, the S-LMC patch exhibits >5× lower impedance, >2× higher ECG signal fidelity (20.23 dB vs. 9.03 dB under motion), and >2.4× higher long-term adhesion after 7 days. Its re-entrant microarchitecture also improves Galinstan confinement, achieving >2× higher critical pressure for leakage. These features enable motion-resilient biosignal monitoring and scalable system integration, establishing the S-LMC patch as a promising platform for next-generation skin-conformal bioelectronic interfaces.
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

