Related Experiment Video
Updated: Jul 21, 2026

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
Tri-band shared aperture MIMO metantenna with broadband low scattering characteristics
None:
In this paper, a triple band shared aperture multiple input multiple output (MIMO) antenna is proposed, with each antenna capable of reducing radar cross section (RCS). The RCS reduction (RCSR) of 4-14 GHz is accomplished through a chessboard-distributed dual-layer polarization conversion metasurface (PCM). The PCM is fed directly by an L-shaped branch, forming a metantenna covering 5.3-6.9 GHz and is assembled into a 4×2 ±45° dual-polarized MIMO antenna, with isolation exceeding 20 dB without extra decoupling technology. A low-frequency and four mid-frequency antennas are loaded in the vacant area of the metantenna, forming a shared aperture MIMO antenna covering 2-3.36 GHz and 3.37-5.11 GHz, respectively. Frequency selective surfaces (FSSs) with band-pass characteristics are loaded on the arms of dipole to enable electromagnetic wave transmission of 5.3-6.9 GHz, minimizing its impact on the high-frequency antenna's radiation characteristics. The scattering characteristics of dipoles also allow for RCS reduction within 2-4 GHz. Besides, additional layers controlling RCS (ALCR) are loaded on the edges of the MIMO metantenna to further reduce RCS within 2-4 GHz. Ultimately, a radiation bandwidth of 110.1% covering 2-6.9 GHz is achieved, covering almost S and C bands, with a low-scattering bandwidth of 2-12.2 GHz covering S, C and X bands, achieving an RCSR of 9 dB within the frequency band.
More Related Videos
Related Concept Videos
Dual Nature of Electromagnetic (EM) Radiation
Wavelength is the distance between two consecutive peaks (the highest point) or troughs (the lowest point) in the wave. Frequency is the number of...
Transmission Line Design Considerations
Boundary Conditions: Lossless Lines
At the receiving end, the boundary condition states that the voltage equals the product of the receiving-end impedance and current. This relationship is expressed as a function of the incident and...
The Midpoint Formula

