Cost-Effective Fabrication of Silica-Silver Microspheres with Enhanced Conductivity for Electromagnetic Interference...

A green and cost-effective method was employed to efficiently synthesize conductive silica-silver (SiO₂/PCPA/Ag) core-shell structured microspheres. The SiO₂ microspheres were initially functionalized with poly(catechol-polyamine), followed by the in situ reduction of Ag ions to Ag nanoparticles on the surface of the SiO₂ microspheres using an electroless plating process. Analysis using scanning electron microscopy confirmed the successful formation of a dense and uniform silver layer on the surface of the SiO₂ microspheres. The valence state of the silver present on the surface of the SiO₂ microspheres was determined to be zero through analyses conducted using an X-ray photoelectron spectrometer and X-ray diffractometer. Consequently, the SiO₂/PCPA/Ag microspheres, upon initial preparation, demonstrated a notable conductivity of 1005 S/cm, which was further enhanced to 1612 S/cm following additional heat treatment aimed at rectifying defects within the silver layer. The resulting rubber composites displayed a low electrical resistivity of 5.4 × 10^-3 Ω·cm and exhibited a significant electromagnetic interference (EMI) shielding effectiveness exceeding 100 dB against both X-band and Ku-band frequencies, suggesting promising potential for utilization as a material for conducting and EMI shielding purposes.