Related Experiment Video
Updated: Jan 13, 2026

Real-time In Vitro Monitoring of Odorant Receptor Activation by an Odorant in the Vapor Phase
Published on: April 23, 2019
GCEA-YOLO: An Enhanced YOLOv11-Based Network for Smoking Behavior Detection in Oilfield Operation Areas
Qing Liu1, Xiaojing Wan2, Yuzhou Sheng2
1School of Chemical Engineering, Xinjiang University, Urumqi 830049, China.
Abstract:
Smoking in oilfield operation areas poses a severe risk of fire and explosion accidents, threatening production safety, workers' lives, and the surrounding ecological environment. Such behavior represents a typical preventable unsafe human action. Detecting smoking behaviors among oilfield workers can fundamentally prevent such safety incidents. To address the challenges of low detection accuracy for small objects and frequent missed or false detections under extreme industrial environments, this paper proposes a GCEA-YOLO network based on YOLOv11 for smoking behavior detection. First, a CSP-EDLAN module is introduced to enhance fine-grained feature learning. Second, to reduce model complexity while preserving critical spatial information, an ADown module is incorporated. Third, an enhanced feature fusion module is integrated to achieve effective multiscale feature aggregation. Finally, an EfficientHead module is employed to generate high-precision and lightweight detection results. The experimental results demonstrate that, compared with YOLOv11n, GCEA-YOLO achieves improvements of 20.8% in precision, 6.9% in recall, and 15.1% in mean average precision (mAP). Overall, GCEA-YOLO significantly outperforms YOLOv11n.
More Related Videos
Related Concept Videos
Gas Chromatography: Types of Detectors-II
Olfaction
The olfactory receptors are embedded in the cilia of the...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Pulse Oximetry
Purpose
Average SpO2 values are greater than 95%. If the readings fall below 90%, it indicates that...
Pulse Assessment Sites

