Related Experiment Video
Updated: Jan 20, 2026
Gas Chromatography GC with Flame-Ionization Detection
Published on: April 30, 2023
Determination of Monoethylene Glycol in Gas Condensate Samples by Microchip Micellar Electrokinetic Chromatography
Maurício M L Pereira1, Kariolanda C A Rezende1,2, Iris Medeiros Junior3
1Instituto de Química, Universidade Federal de Goiás, Goiânia, GO, Brazil.
Abstract:
This study describes the use of microchip micellar electrokinetic chromatography (MEKC) integrated with capacitively coupled contactless conductivity detection (C4D) for the determination of monoethylene glycol (MEG) in gas condensate samples. The samples were subjected to a liquid-liquid extraction step and then analyzed by chip-based MEKC-C4D. For this purpose, sodium dodecyl sulfate (SDS) was used as a surfactant at a concentration of 30 mmol L-1 added in 50 mmol L-1 phosphate (pH = 9.0). Samples were introduced into microchannels through floating injection mode by applying a voltage of 600 V during 10 s. Separations were performed under an electric field of 82 V cm-1 and monitored by C4D measurements recorded applying a 1200-kHz frequency sinusoidal wave with 20-Vpp excitation voltage. The proposed methodology employing MEKC-C4D revealed a linear behavior (r2 ≥ 0.99) in the MEG concentration range between 150-450 µmol L-1 and LOD equal to 33 µmol L-1. Three gas condensate samples were then analyzed, and the achieved MEG concentration values ranged from 173 to 213 µmol L-1. Recovery experiments provided values between 89 and 102%. Based on the results reported in this study, MEKC-C4D devices have demonstrated to be a promising and ecological analytical tool for MEG analysis with huge potential for in-field applications.
More Related Videos
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Published on: August 19, 2018
13:02Arabidopsis thaliana Polar Glycerolipid Profiling by Thin Layer Chromatography TLC Coupled with Gas-Liquid Chromatography GLC
Published on: March 18, 2011
Related Concept Videos
Gas Chromatography (GC) with Flame-Ionization Detection
Gas chromatography (GC) is used to separate and detect small molecular weight compounds in the gas phase. The sample is either a gas or a liquid that is vaporized in the injection port. Typically, the compounds analyzed are less than 1,000 Da, because it is difficult to vaporize larger compounds. GC is popular for environmental monitoring and industrial applications because it is very reliable and can be run nearly continuously....
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
13:02Arabidopsis thaliana Polar Glycerolipid Profiling by Thin Layer Chromatography (TLC) Coupled with Gas-Liquid Chromatography (GLC)
08:07A Two-Step Pyrolysis-Gas Chromatography Method with Mass Spectrometric Detection for Identification of Tattoo Ink Ingredients and Counterfeit Products
08:22Ultrasensitive Detection of Biomarkers by Using a Molecular Imprinting Based Capacitive Biosensor