Related Experiment Video
Updated: Feb 6, 2026

Calcium Carbonate Formation in the Presence of Biopolymeric Additives
Published on: May 14, 2019
Denitrification performance enhanced by optimizing the sites of external carbon addition in a full-scale anoxic tank
Yang Zhou1, Jie Zhang2,3, QingQing Wang4
1Zhongyuan Environmental Protection Co., Ltd, Zhengzhou, 450007, China.
Abstract:
Low influent carbon-to-nitrogen (C/N) ratios often limit denitrification in municipal wastewater treatment systems. This study evaluated denitrification performance in a full-scale anaerobic-anoxic-oxic (AAO) process equipped with a 6 m-deep anoxic tank containing spherical fixed carriers. Sludge flocs and carrier-attached biofilms were sampled at depths of 1 m, 3 m and 5 m along the horizontal flow path. Denitrification kinetics were quantified using batch tests, and microbial community structures were analyzed by 16 S rRNA gene sequencing. Sludge flocs exhibited the highest denitrification rates at 1 m, whereas biofilms performed optimally at 3 m. Along the horizontal direction, sludge flocs near the influent and external carbon dosing site showed enhanced denitrification, while biofilms downstream of the propeller demonstrated improved denitrification. Elevated dissolved oxygen (DO) introduced by internal reflow reduced the effective utilization of the external carbon source. Nitrosomonas was more abundant in sludge flocs, whereas Thauera dominated denitrifying community and peaked at 3 m in biofilms. Based on the spatial distribution of denitrification kinetics and microbial communities, the conventional "pre and top" carbon dosing strategy was re-evaluated, and an optimized "post and top" dosing strategy was proposed. This strategy reduced chemical oxygen demand (COD) consumption per unit of total nitrogen (TN) removed by 16%, providing a practical approach to enhance denitrification efficiency and external carbon utilization in full-scale anoxic tanks.
Related Concept Videos
Conserved Binding Sites
Binding sites are often located in large pockets, and if their location on a protein’s surface is unknown, it can be predicted using various approaches. The energetic method computationally...
Conjugate Addition (1,4-Addition) vs Direct Addition (1,2-Addition)
Conjugate addition results in a thermodynamically stable product. The reaction retains the stronger C=O bond at the expense of the weaker C=C π bond. The process is slow as the β carbon is less electrophilic than the carbonyl carbon.
Direct addition products are...
Carbon Skeletons
Ligand Binding Sites
Protein-ligand interactions are quite specific; even though numerous potential ligands surround a cellular protein at any given time, only a particular ligand can bind to that protein. Moreover, a ligand binds only to a dedicated area on the surface of the protein, known as the...
Ligand Binding Sites
The Carbon Cycle

