Development of Wideband Circular Microstrip Patch Antenna for Use in Microwave Imaging for Brain Tumor Detection

This work presents the design of a compact, wideband circular microstrip patch antenna for microwave imaging-based brain tumor detection. The main contribution is the development of a compact antenna structure incorporating enhanced ground-plane slot modifications, which significantly improves impedance bandwidth while maintaining a small electrical size, making it highly suitable for medical imaging systems. In addition, the study integrates antenna design, safety evaluation, and microwave imaging analysis within a unified framework to assess tumor localization feasibility using a realistic head model in CST Microwave Studio. The proposed antenna is fabricated on an FR-4 substrate with dimensions of 37 × 54.5 × 1.6 mm³, corresponding to an electrical size of 0.176λ × 0.260λ × 0.0076λ at the lowest operating frequency of 1.43 GHz. Ground-plane slot enhancements are introduced to achieve wideband performance, resulting in an impedance bandwidth from 1.43 to 4 GHz and a fractional bandwidth of 94.7%. The antenna exhibits a maximum realized gain of 3.7 dB. To evaluate its suitability for medical applications, specific absorption rate (SAR) analysis is performed using a realistic human head model at multiple antenna positions and at 1.5, 2.1, 2.5, 3.3, and 3.9 GHz frequencies. The computed SAR values range from 0.109 to 1.56 W/kg averaged over 10 g of tissue, satisfying the IEEE C95.1 safety guideline limit of 2 W/kg. For tumor detection assessment, time-domain simulations are conducted in CST Microwave Studio using a monostatic radar configuration, where the antenna operates as both transmitter and receiver at twelve angular positions around the head with 30° increments. The collected scattered signals are processed using the Delay-and-Sum (DAS) beamforming algorithm to reconstruct dielectric contrast maps and localize the tumor. It should be noted that the tumor-imaging demonstrations presented in this work are based on numerical simulations, while experimental validation is limited to the characterization of the fabricated antenna. Nevertheless, the findings indicate that the proposed antenna is a promising candidate for noninvasive, low-cost microwave brain tumor imaging applications.