A Spectral Confocal Measurement Method for High-Aspect-Ratio Deep Holes Based on Stepped Ring Gauge and Hierarchical...

To address the issues of uneven accuracy across the entire hole depth and profile distortion caused by multi-source errors in spectral confocal deep-hole measurement, this paper proposes a measurement method involving global calibration using a stepped ring gauge and hierarchical compensation for multi-source errors. By classifying core measurement errors into three categories-geometric deviation, structural error, and dynamic process error-according to their propagation laws, this paper establishes a progressive comprehensive compensation system comprising "geometric calibration-structural correction-dynamic filtering". Specifically, using a stepped ring gauge as the reference, the system's intrinsic geometric parameters are identified via the Levenberg-Marquardt (LM) algorithm; structural errors introduced by the deflection of components due to self-weight are quantitatively corrected based on a statics model; periodic harmonic errors are sequentially separated; random noise is effectively suppressed by combining least-squares harmonic fitting with adaptive wavelet threshold filtering. Experimental results demonstrate that this method can limit the maximum absolute deviation in the inner diameter measurement of standard ring gauges to within 0.2 μm, stabilizing the measurement repeatability over the entire depth of deep-hole workpieces with length-to-diameter ratios exceeding 30:1 to within 0.8-1.6 μm, with an expanded uncertainty of U = 3.8 μm (k = 2). This method enables the precise reconstruction of deep-hole inner wall topography, providing a highly versatile technical foundation and implementation scheme for the high-precision non-destructive testing of deep holes with large length-to-diameter ratios.