Related Experiment Video
Updated: Sep 26, 2026

Nanosensors to Detect Protease Activity In Vivo for Noninvasive Diagnostics
Published on: July 16, 2018
Periodontal Disease Diagnosis by a Chemically Etched Single-Mode Fiber-Optic Biosensor for Label-Free Detection of
Rigoberto Tovar1, Sarkis Sozkes1,2, Marzhan Sypabekova1
1Department of Bioengineering, Civil Engineering, and Environmental Engineering, U. A. Whitaker College of Engineering, Florida Gulf Coast University, 10501 FGCU Boulevard South, Fort Myers, FL 33965, USA.
Abstract:
A miniature label-free biosensor based on a chemically etched single-mode optical fiber (SMF) is reported for the detection of matrix metalloproteinase-8 (MMP-8), a salivary biomarker of active periodontitis with a clinical decision threshold of 20 ng/mL. Fibers etched in 48% hydrofluoric acid to a waist diameter of 16.0 ± 1.4 µm gave a mean refractive index (RI) sensitivity of 376.8%/RIU and an RI limit of detection (LOD) of 5.9 × 10-4 RIU. Fibers were tested with MMP-8 spiked into phosphate-buffered saline (PBS) and into saliva over 0-200 ng/mL using a post-rinse protocol with per-fiber matrix subtraction. Dose-responses followed a Langmuir isotherm (Kd = 7.1 ng/mL in PBS, 12.7 ng/mL in saliva), with cohort LODs of 0.043 and 0.52 ng/mL, both well below the threshold. MMP-9 (100 ng/mL) and human serum albumin (1 mg/mL) gave negligible responses (≤2.7%, versus 68.2% for MMP-8 at 100 ng/mL); antibody immobilization was confirmed by confocal immunofluorescence. A commercial sandwich ELISA on the same spike series gave a matched-matrix LOD of 41.1 ng/mL, nearly two orders of magnitude higher. This performance requires no metal coating, nanostructuring, label, or signal amplification, only a single wet-etching step on stock telecommunications fiber.

