In vitro evaluation of platelet/biomaterial interactions in an epifluorescent video microscopy combined with a...

Suitable evaluation systems are critical for ranking various biomaterials in order to develop a method to design and synthesize nonthrombogenic biomaterials. We have recently developed an in vitro test system to evaluate platelet/biomaterial interactions in whole blood. The system consists of a parallel plate flow cell and epifluorescent video microscopy (EVM). A glass coverslip coated with a polymer was incorporated into the flow cell, and blood was perfused using a syringe pump via a polymer-coated PVC tubing connected to the flow cell. Whole human blood was anticoagulated with heparin (2 U/ml), and the platelets were labeled with the fluorescent dye mepacrine (5 microM). This system permitted real-time and dynamic observations of platelet/biomaterial interactions in whole blood under a defined flow condition. In order to evaluate the feasibility of this system, two different segmented polyether-polyurethanes (SPEUs), PU-PTMG(650) and PU-PTMG(2000), were chosen as test polymers. Surface characteristics verified with electron spectroscopy for chemical analysis (ESCA) and contact angle measurements showed similar results in both SPEUs. Blood was perfused at a wall shear rate of 200 s-1 for 20 min. Excitation light was applied for 2 s at 1 min intervals. The real-time image was then analyzed at each time point for the percentage of surface area of platelet coverage. Plasma beta-thromboglobulin (beta-TG) levels were also measured before and after each run. PU-PTMG(650) showed a significantly higher number of adhered platelets than PU-PTMG(2000) at each time point.(ABSTRACT TRUNCATED AT 250 WORDS)