Electrochemical sensor for heparin: further characterization and bioanalytical applications

Further studies regarding the potentiometric response to heparin of polymeric membranes doped with lipophilic quaternary ammonium salts are reported. Among a wide range of membrane formulations examined, optimum response toward macromolecular heparin is achieved using tridodecylmethylammonium chloride as the active membrane component within poly(vinyl chloride) or poly(vinyl chloride)/(vinyl acetate) films plasticized with dioctyl sebacate. Although such membranes are shown to exhibit a typical Hofmeister potentiometric selectivity pattern toward small inorganic and organic anions, a very large and reproducible response to heparin at submicromolar levels is observed in the presence of physiological saline (0.12-0.15 M NaCl), as well as in citrated whole blood. Equal response on a mass basis occurs with fragments of heparin's as small as 2500 Da. Complexation of heparin's anionic sites by macromolecules that bind heparin with high affinity (e.g., protamine and poly(L-lysine)) reduces the membrane electrode's heparin response, indicating that the electrode detects biologically available (unbound) heparin levels in solution. Quantitative potentiometric titrations of protamine with porcine mucosa heparin followed by the sensor yield stoichiometric values in good agreement with the literature. The biomedical utility of the sensor is demonstrated by measuring its response in whole blood from patients undergoing open heart surgery before and after heparin therapy and correlating such response to conventional blood clotting time measurements.