Respiratory characteristics of a microporous membrane oxygenator

A microporous membrane oxygenator has been used in 258 clinical perfusions for cardiac surgery. In 132 perfusions the oxygenator was ventilated with 100% O2, and in 126 perfusions 98% O2-2%CO2 was used. Patients' BSA was 0.4-2.3 M2. Bypass duration was up to 563 min. In the group ventilated with 100% O2, average PaCO2 was 30 mmHg, with arterial pH of 7.48. 98% O2-2% ventilation resulted in an average PaCO2 of 36 mmHg, with arterial pH of 7.41. CO2 transfer is influenced by gas flow rate, and data from selected cases demonstrate that increasing gas flow results in decreasing PaCO2, while decreasing gas flow increases PaCO2. The thickness of the blood film is decreased by increasing the "shim" pressure, so that increasing the "shim" presure results in higher PaO2. Oxygen saturation averaged 99% for the entire series. Addition of CO2 to the oxygen and appropriate changes in gas flow and "shim" pressure permit changes to be made in the ventilation of the device during perfusion to achieve desired levels of PaO2 and PaCO2 under widely disparate conditions of temperature and flow.