Improved ultrastructural preservation of bioprosthetic tissue

Poor ultrastructural tissue preservation of bioprosthetic heart valves is associated with a higher propensity for calcification. In spite of this realization, commercial valve fixation remains suboptimal.

In an attempt to maintain tissue integrity through improved cross-linking procedures, transmission electron microscopy and a 21-point damage score were applied to assess the ultrastructural preservation of aortic wall tissue-the main component of contemporary aortic valve bioprostheses. An ideal glutaraldehyde (GA) concentration was assessed by immediate tissue fixation at 4 degrees C comparing 0.2%, 0.5%, 0.65%, 1.0%, 2.0%, 3.0% and 4.0% GA in phosphate-buffered saline (PBS). Subsequently, an optimal concentration of 3.0% GA was used to determine the effect of fixation temperature (4 degrees, 22 degrees and 37 degrees C). Finally, the superior glutaraldehyde concentration (3.0%) and cross-linking temperature (4 degrees C) were used to assess tolerance towards delayed fixation.

When different GA concentrations were used almost identical damage scores of 6.3 and 5.8 were found for 0.2% and 0.65% fixation. The first significant improvement was found at a concentration of 1.0% (score 3.3; p < 0.01) followed by a further improvement at 3.0% (score 2.6; p = 0.05). The optimal fixation temperature was 4 degrees C (3.7) with the worst results obtained at room temperature (score 9.2; p < 0.03). When fixation was delayed, the most significant damage occurred during the initial 30 min after slaughter (from 2.3 to 7.4; p < 0.02) followed by another significant deterioration between 4 and 16 h (from 5.6 to 9.7; p < 0.02).

In summary, the prerequisites for an ideal ultrastructural preservation of bioprosthetic aortic wall tissue are immediate fixation (within 30 min), high GA concentrations (> 1.0%) and cold-temperature fixation (4 degrees C).