A novel nozzle for more efficient sperm orientation to improve sorting efficiency of X and Y chromosome-bearing sperm

Efficient high-resolution detection of DNA for flow cytometric sorting of X and Y chromosome-bearing sperm is dependent on effectively orientating the sperm head to the laser beam in orthogonally configured flow systems. Normally, a beveled needle is required to enlarge the fraction of properly orientated sperm (flat side facing the laser beam). In this report, a modification to a standard jet-in-air nozzle for improved sperm orientation is presented. Inside the modified nozzle (novel nozzle), orientation forces are applied lower in the nozzle than in the current beveled injection needle system. The nozzle was tested with sperm heads from several species. This study shows that use of the nozzle to orientate cattle, swine, rabbit, mouse, and human sperm effectively improves the percentage of sperm that are properly oriented. The percentage of sperm heads oriented by use of the former system (beveled needle) ranges around 30% for most species. With the newly designed nozzle, that percentage ranges around 60%. At least a twofold increase in analysis is achieved. It was found that, unlike results with the beveled needle, the percentage of properly oriented sperm was independent of the sample rate. The introduced nozzle is a significant improvement over the beveled needle system for the analysis and sorting of sperm on the basis of DNA content. In addition to the improvement in sorted sperm production brought about by the novel nozzle when fitted to standard-speed cell sorters, it clearly also has significant potential for improving the efficiency of the Beltsville Sperm Sexing Technology for separating X and Y chromosome-bearing sperm when adapted to high-speed cell-sorting systems.