Rapid alcohol determination in plasma and urine by column liquid chromatography with biosensor detection

An enzyme based amperometric biosensor used as a selective and sensitive detection unit in column liquid chromatography for the determination of ethanol and methanol in biological fluids such as plasma and urine is described. The reagentless enzyme electrode is based on the co-immobilisation of alcohol oxidase and horseradish peroxidase in carbon paste. The selectivity of the biosensor was found to vary when four various alcohol oxidase enzyme preparations from Candida boidinii, Pichia pastoris, and Hansenula polymorpha were used in the biosensors described. High sensitivity could be obtained for a number of alcohols, organic acids, and aldehydes. Optimisation regarding the sensitivity and selectivity of the four alcohol oxidase co-immobilised biosensors are outlined. A fast and reliable liquid chromatographic separation system with a PLRP-S polymer based separation column used with a phosphate buffer as the mobile phase was optimised using the best biosensor which was based on alcohol oxidase from P. pastoris and which showed the highest turnover rate for alcohols, as the detector for the determination of ethanol and methanol in human urine and plasma samples. The selectivity and stability of the biosensor were retained by working at an applied potential of -50 mV versus Ag/AgCl, the optimal operational potential, and by the casting of a protective membrane on the electrode surface. High selectivity of the enzyme electrode was also found towards other easily oxidisable interfering species normally present in biological fluids. It was found that stable and reliable determinations of ethanol and methanol in plasma and urine could be performed with only a simple dilution and centrifugation step prior to injection into the liquid chromatographic system. An analysis time of 4 min was required for the assay, with a sample throughput of 13 samples h(-1).