In vitro fracture toughness of human dentin

The in vitro fracture toughness of human dentin has been reported to be of the order of 3 MPa (square root)m. This result, however, is based on a single study for a single orientation, and furthermore involves notched, rather than fatigue precracked, test samples. The present study seeks to obtain an improved, lower-bound, value of the toughness, and to show that previously reported values may be erroneously high because of the absence of a sharp crack as the stress concentrator. Specifically, the average measured critical stress intensity, K(c), for the onset of unstable fracture along an orientation perpendicular to the long axis of the tubules in dentin is found to be 1.8 MPa (square root)m in simulated body fluid (Hanks' balanced salt solution), when tested in a three-point bending specimen containing a (nominally) atomically sharp precrack generated during prior fatigue cycling. This is to be compared with a value of 2.7 MPa (square root)m measured under identical experimental conditions except that the bend specimen contained a sharp machined notch (of root radius 30-50 microm). The effect of acuity of the precrack on the fracture toughness of human dentin is discussed in the context of these data.