Extraction and determination of trace amounts of energetic compounds in blood by gas chromatography with electron capture detection (GC/ECD)
Related Experiment Video
Updated: Jun 27, 2026

Quantitative Detection of Trace Explosive Vapors by Programmed Temperature Desorption Gas Chromatography-Electron Capture Detector
Published on: July 25, 2014
Baohong Zhang1, Xiaoping Pan, Jordan N Smith
1The Institute of Environmental and Human Health, and Department of Environmental Toxicology, Texas Tech University, Lubbock, TX 79409, USA.
Abstract:
This paper describes an efficient and sensitive method for determining five energetic compounds at trace levels (ng/mL) in blood by gas chromatography with electron capture detection (GC/ECD). For seven test concentrations (1-1250ng/mL), the average recoveries (%) were 104+/-16, 108+/-22, 105+/-14, 100+/-22 and 108+/-16 for hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and 2,4,6-trinitrotoluene (TNT) (n=84), respectively. Analysis of DNX and RDX produced lower precision than other energetic compounds. Acetonitrile extracts of blood samples should be analyzed immediately as the test compounds can transform into unknown compounds, which lowered the recovery by 0-45% within 10 days at room temperature ( approximately 20 degrees C). Maintaining sample extracts at 4 degrees C decreased loss of test compounds. The method described herein was validated by different analysis teams on different days. Two-way ANOVA indicated that there was no significant difference between analysis teams or days of analysis. The method was successfully employed in the analysis of blood samples from a mouse dosing study involving TNX and RDX.
More Related Videos
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
Published on: May 25, 2021
08:56Detection of Regulated Ergot Alkaloids in Food Matrices by Liquid Chromatography-Trapped Ion Mobility Spectrometry-Time-of-Flight Mass Spectrometry
Published on: November 22, 2024
Related Concept Videos
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Capillary Electrophoresis: Applications
Capillary zone electrophoresis (CZE) separates ionic components based on their electrophoretic mobility. It has been used to separate proteins, amino acids,...