Optical neural-net analog-to-digital converter

Vision is the result of light being detected and transduced into neural signals by the retina of the eye. This information is then further analyzed and interpreted by the brain. First, light enters the front of the eye and is focused by the cornea and lens onto the retina—a thin sheet of neural tissue lining the back of the eye. Because of refraction through the convex lens of the eye, images are projected onto the retina upside-down and reversed.

The retina is a layer of nervous tissue at the back of the eye that transduces light into neural signals. This process, called phototransduction, is carried out by rod and cone photoreceptor cells in the back of the retina.

Light enters the eye through the cornea, a transparent, dome-shaped surface covering the surface of the eyeball that helps to direct and focus incoming light. This light is then channeled toward the pupil, an adjustable opening whose size is controlled by the iris. The iris, a pigmented muscle, regulates the amount of light entering the eye by contracting or dilating the pupil, thereby ensuring optimal light levels for clear vision.
Once through the pupil, the light passes through the lens, a...

The eye is a spherical, hollow structure composed of three tissue layers. The outer layer — the fibrous tunic, comprises the sclera — a white structure — and the cornea, which is transparent. The sclera encompasses some of the ocular surface, most of which is not visible. However, the 'white of the eye' is distinctively visible in humans compared to other species. The cornea, a clear covering at the front of the eye, enables light penetration. The eye's middle layer, the vascular tunic,...

A balanced wye-to-delta circuit comprises balanced Y-connected voltage sources and delta-connected loads with no neutral line connection.
The initial step in analyzing a wye-to-delta circuit is to assume a positive phase sequence. These phase voltages are then utilized to calculate the line voltages that occur directly across the delta-connected load impedances. Van, Vbn, and Vcn are the phase voltages in wye, and Vab, Vbc, and Vca are the line voltages for a delta circuit. The relation between...

In an inverting amplifier, the input voltage is connected through a resistor to the inverting terminal. Meanwhile, the non-inverting terminal is grounded and a feedback resistor is established between the inverting and output terminal, as depicted in Figure 1.