Related Experiment Video
Updated: Jun 7, 2026

Alternative In Vitro Methods for the Determination of Viral Capsid Structural Integrity
Published on: November 16, 2017
Inactivation of human and murine norovirus by high-pressure processing
Gloria Sánchez1, Rosa Aznar, Antonio Martínez
1Department of Biotechnology, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), Paterna, Spain. gloriasanchez@iata.csic.es
Abstract:
The effect of high hydrostatic pressure (HPP) was evaluated for inactivation of murine norovirus (MNV), a propagable norovirus (NoV), and human NoV genogroup II.4. Inactivation of MNV was assessed by viral culturing (50% tissue culture infectious dose [TCID(50)]) and real-time reverse-transcription-polymerase chain reaction (RT-qPCR), whereas NoV survival was determined only by RT-qPCR. A treatment of 450 MPa for 15 min at 45°C was sufficient to inactivate 6.5 log(10) of infectious MNV in culture medium as determined by TCID(50). Further, the inactivation of MNV was enhanced when pressure was applied at an initial temperature of 25°C. On the other hand, a baroprotective effect was observed when MNV suspensions were supplemented with 10 mM of CaCl(2). A 400 MPa treatment at 45°C inactivated >5 log(10) of infectious MNV, whereas the addition of CaCl(2) increased the pressure resistance of MNV, with <0.5 log(10) reduction observed. MNV decay as determined by TCID(50) was generally greater than that determined by RT-qPCR; for instance, MNV genomes were detected even after 15 min treatment at 450 MPa, with <0.5 log(10) reduction. Experiments with NoV suspensions showed that all tested HPP treatments reduced the numbers of NoV by <0.5 log(10) units as determined by RT-qPCR. Additionally, RNA of human NoV was more resistant to certain HPP treatments than the RNA of MNV.
More Related Videos
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Pasteurization and Food Preservation
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Temperature
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...

