[Catalytic hydrodechlorination of 2,4-dichlorophenol over Pd/TiO2]

Pd/TiO2 catalysts were prepared by the deposition-precipitation and impregnation methods, and were further characterized by TEM, XRD and ICP-AES. The liquid catalytic hydrodechlorination of 2,4-dichlorophenol over the catalysts was investigated. It is demonstrated that despite catalyst prepared by deposition-precipitation method exhibits higher activity than that synthesized from impregnation method, both catalysts show good performance in hydrodechlorination process. When initial concentration of the reactant was 3.11 mmol x L(-1), pH was 12 and amount of catalyst used was 50 mg, hydrodechlorination of 2,4-dichlorophenol was completed within 45 min. Acidic condition facilitates hydrodechlorination process. The initial activity was not significantly influenced when the amount of catalyst used varied between 15-80 mg, which proves that mass transport limitation exerts little impact on hydrodechlorination reaction. Finally, the initial activity sharply enhanced with the increase of initial concentration of 2,4-dichlorophenol when the concentration was in the range of 0.62-3.11 mmo x L(-1) while it almost remained constant with further increasing the initial concentration. Therefore, the catalytic hydrodechlorination of 2,4-dichlorophenol over Pd/TiO2-DP follows the Langumuir-Hinshelwood model, indicating that the catalytic hydrodechlorination is controlled by 2,4-dichlorophenol adsorption.