Related Experiment Video
Updated: May 21, 2026

Analysis of Organochlorine Pesticides in a Soil Sample by a Modified QuEChERS Approach Using Ammonium Formate
Published on: January 20, 2023
[Determination of trace perchlorate in groundwater by solid phase extraction-ion chromatography]
1State Key Laboratory of Urban Water Resource and Environment of Harbin Institute of Technology, Harbin 150090, China.
Abstract:
A comprehensive analytical method based on solid phase extraction-ion chromatography (SPE-IC) has been developed for the determination of trace perchlorate in groundwater. An amount of 0.7 liter of groundwater was enriched by a solid phase extraction column after pretreatment to remove the interference ions and then the column was eluted by 6 mL 1% NaOH solution. After filtration of the concentrated liquor with a filter membrane (0.45 microm), the liquor was analyzed on an ion chromatograph (IC) equipped with an Ion Pac AS20 separation column and a 50 microL injection loop, eluted with 40 mmol/L KOH solution. The method detection limit (MDL) and limit of determination (LOD) of perchlorate were 0.15 microg/L and 0.60 microg/L, respectively. The recovery was in the range of 99.7%-100.5% when the sampling concentrations were in the range of 1-15 microg/L. The method is economical and effective. It can be applied to determine trace perchlorate in groundwater. The perchlorate in groundwater samples got from the areas surrounding Harbin was determined by this method. The relative errors were in the range of 1.85%-9.24% between the results got by the SPE-IC and ion chromatography-tandem single quadrupole mass spectrometry.
Related Concept Videos
Ion-Exchange Chromatography
Extraction: Advanced Methods
Precipitation Titration: Endpoint Detection Methods
In the Volhard method, a standard excess of AgNO3 is first added to the...
Precipitation and Co-precipitation
Gravimetry: Inorganic And Organic Precipitating Agents
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

