Related Experiment Video
Updated: May 20, 2026
Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition
Published on: February 27, 2013
Structural, morphological, and optical properties of TiO2 thin films synthesized by the electro phoretic deposition
Najla Ghrairi1, Mongi Bouaicha
1Laboratoire de Photovoltaique, Centre de Recherches et des Technologies de l'Energie, Technopole de Borj-Cedria, BP 95, Hammam-Lif, Tunis, 2050, Tunisia. Mongi.Bouaicha@crten.rnrt.tn.
Abstract:
In this work, we report the structural, morphological, and optical properties of TiO2 thin films synthesized by the electro phoretic deposition technique. The TiO2 film was formed on a doped fluorine tin oxide (SnO2:F, i.e., FTO) layer and used as a photo electrode in a dye solar cell (DSC). Using spectroscopic ellipsometry measurements in the 200 to 800 nm wavelengths domain, we obtain a thickness of the TiO2 film in the range of 70 to 80 nm. Characterizations by X-ray diffraction and atomic force microscopy (AFM) show a polycrystalline film. In addition, AFM investigation shows no cracks in the formed layer. Using an ultraviolet-visible near-infrared spectrophotometer, we found that the transmittance of the TiO2 film in the visible domain reaches 75%. From the measured current-voltage or I-V characteristic under AM1.5 illumination of the formed DSC, we obtain an open circuit voltage Voc = 628 mV and a short circuit current Isc = 22.6 μA, where the surface of the formed cell is 3.14 cm2.
