Related Experiment Video
Updated: May 7, 2026
07:45
Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
Compact Q-value enhanced bandpass filter based on the EIT-like effect accompanying application in downconversion APL.
Optics Letters
|October 2, 2013
Summary
Researchers developed a novel bandpass filter using an electromagnetically induced transparency (EIT)-like effect. This compact filter significantly enhances quality factor (Q) for improved performance in analog photonic links.
Area of Science:
- Optoelectronics
- Photonics
- Resonator Circuits
Background:
- Traditional bandpass filters often face limitations in quality factor (Q) and performance.
- Electromagnetically induced transparency (EIT) offers a route to enhance optical properties.
- Ring resonators are fundamental components in photonic integrated circuits.
Purpose of the Study:
- To propose and experimentally demonstrate a compact Q-enhanced bandpass filter.
- To leverage the EIT-like effect for significant Q-factor improvement.
- To integrate the filter into a downconversion analog photonic link (APL).
Main Methods:
- Utilized a coupled two-ring resonator structure.
- Exploited the electromagnetically induced transparency (EIT)-like phenomenon.
- Fabricated and tested the compact bandpass filter.
Main Results:
- Achieved a Q-factor enhancement of 2-3 orders of magnitude compared to single-ring filters.
- Demonstrated a 27-fold enhanced bandpass filter with a 4.8 GHz bandwidth.
- Integrated the filter into a downconversion APL, achieving a spurious free dynamic range of 103.9 dB-Hz(2/3).
Conclusions:
- The proposed EIT-like effect in a two-ring resonator provides a viable method for Q-enhancement.
- The compact filter demonstrates superior performance suitable for advanced photonic applications.
- The developed APL shows high dynamic range, benefiting from the enhanced filter characteristics.
Related Concept Videos
01:17Bandpass Sampling
In signal processing, bandpass sampling is an effective technique for sampling signals that have most of their energy concentrated within a narrow frequency band. This type of signal is known as a bandpass signal. The key principle of bandpass sampling involves sampling the signal at a rate that is greater than twice the signal's bandwidth to prevent aliasing.
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2. The spectrum...
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2. The spectrum...
01:25Active Filters
Active filters are electronic circuits that use operational amplifiers (op-amps), resistors, and capacitors to filter out unwanted frequency components from a signal. A first-order low-pass active filter is designed to pass signals with a frequency lower than a certain cutoff frequency and attenuate frequencies higher than that cutoff frequency. The transfer function for a first-order low-pass active filter is:
01:27Passive Filters
Passive filters are utilized to shape the frequency spectrum of signals across a diverse array of applications. These filters, using only passive elements like resistors (R), inductors (L), and capacitors (C), are capable of selectively allowing or blocking certain frequency ranges without the need for external power sources.
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff frequency...
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff frequency...
01:22Upsampling
Managing signal sampling rates is essential in digital signal processing to maintain signal integrity. A decimated signal, characterized by a reduced frequency range due to its lower sampling rate, can be upsampled by inserting zeros between each sample. This upsampling process expands the original spectrum and introduces repeated spectral replicas at intervals dictated by the new Nyquist frequency. To refine this zero-inserted sequence, it is passed through a lowpass filter with a cutoff...
01:24Characteristics of Series Resonant Circuit
Series resonance occurs in a circuit containing inductive (L), capacitive (C), and resistive (R) elements connected sequentially. At the resonance frequency, the inductive and capacitive reactances are equal in magnitude but opposite in sign, effectively canceling each other. This causes the circuit's impedance is minimal, primarily determined by the resistance R. The resonant frequency of an RLC circuit is defined as:
01:17Properties of the z-Transform I
The z-transform is a fundamental tool in digital signal processing, enabling the analysis of discrete-time systems through its various properties. It is an invaluable tool for analyzing discrete-time systems, offering a range of properties that simplify complex signal manipulations. One fundamental property is linearity. For any two discrete-time signals, the z-transform of their linear combination equals the same linear combination of their individual z-transforms. This property is essential...