Related Experiment Video
Updated: Apr 16, 2026
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
The effects of fluorine-contained molecules on improving the polymer solar cell by curing the anomalous S-shaped I-V
Chi-Ang Tseng1, Hsieh-Cheng Han2, Cheong-Wei Chong
1†Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 10617, Taiwan.
Abstract:
In this study, we investigate the effects of fluorinated poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) buffer layer on the performance of polymer photovoltaic cells. We demonstrate for the first time, the deterioration of the device performance can be effectively mended by modifying the interface between the active layer and buffer layer with heptadecafluoro-1,1,2,2-tetra-hydro-decyl trimethoxysilane (PFDS) and perfluorononane. Device performance shows a substantial enhancement of short-circuit current from 7.90 to 9.39 mA/cm(2) and fill factor from 27% to 53%. The overall device efficiency was improved from 0.98% to 3.12% for PFDS modified device. The mechanism of S-shape curing is also discussed. In addition, the stability of modified devices shows significant improvement than those without modification. The efficiency of the modified devices retains about half (1.88%) of its initial efficiency (4.1%) after 30 d compared to the unmodified ones (0.61%), under air atmosphere.
