Design and fabrication of crack-junctions

Nanogap electrodes consist of pairs of electrically conducting tips that exhibit nanoscale gaps. They are building blocks for a variety of applications in quantum electronics, nanophotonics, plasmonics, nanopore sequencing, molecular electronics, and molecular sensing. Crack-junctions (CJs) constitute a new class of nanogap electrodes that are formed by controlled fracture of suspended bridge structures fabricated in an electrically conducting thin film under residual tensile stress. Key advantages of the CJ methodology over alternative technologies are that CJs can be fabricated with wafer-scale processes, and that the width of each individual nanogap can be precisely controlled in a range from <2 to >100 nm. While the realization of CJs has been demonstrated in initial experiments, the impact of the different design parameters on the resulting CJs has not yet been studied. Here we investigate the influence of design parameters such as the dimensions and shape of the notches, the length of the electrode-bridge and the design of the anchors, on the formation and propagation of cracks and on the resulting features of the CJs. We verify that the design criteria yields accurate prediction of crack formation in electrode-bridges featuring a beam width of 280 nm and beam lengths ranging from 1 to 1.8 μm. We further present design as well as experimental guidelines for the fabrication of CJs and propose an approach to initiate crack formation after release etching of the suspended electrode-bridge, thereby enabling the realization of CJs with pristine electrode surfaces.