An aperture coupled microstrip antenna array for high power microwave application

A three-layer aperture coupled microstrip antenna array (ACMA) is designed and fabricated for wideband high-power microwave (HPM) application, which has not been reported in the field of HPM. In this paper, the proposed antenna array overcomes the disadvantage of low power capacity of traditional microstrip antenna arrays. Moreover, based on the H-shaped aperture coupled structure, it enhances the relative bandwidth up to more than 50%. Compared with traditional HPM antennas, it has advantages of being low-profile (less than 0.2λ), wideband, lightweight, and easy to manufacture. The proposed antenna array consists of 60 elements; each element has four aperture coupled patch antennas fed by a four-way microstrip line power divider. In order to realize the modular design, the antenna array is divided into 10 identical modules; benefiting from this design, machining and assembling become easier. Additionally, cold tests and high-power tests are carried out, and the experimental results show that the ACMA achieves a relative bandwidth of 51.2% for voltage standing-wave ratio < 2 from 1.52 to 2.57 GHz. Consistent with simulation results, the measured gain is more than 28.8 dB in the whole bandwidth and it reaches a maximum of 32.1 dB. Finally, the high-power tests show that the power capacity of the proposed ACMA is greater than 140 MW, which proves the feasibility of the design in wideband HPM application.