Related Experiment Video
Updated: Dec 27, 2025

Multicolor Fluorescence Detection for Droplet Microfluidics Using Optical Fibers
Published on: May 5, 2016
Fiberoptic-Coupled Spectrofluorometer with Array Detection as a Process Analytical Chemistry Tool for Continuous Flow
Nader Shokoufi1, Maryam Vosough1, Mona Rahimzadegan-Asl1
1Analytical Instrumentation and Spectroscopy Laboratory, Department of Green Technologies, Chemistry & Chemical Engineering Research Center of Iran, Tehran 14968-13151, Iran.
Abstract:
Nowadays, there is an increasing need for sensitive real-time measurements of various analytes and monitoring of industrial products and environmental processes. Herein, we describe a fluorescence spectrometer in continuous flow mode in which the sample is fed to the flow cell using a peristaltic pump. The excitation beam is introduced to the sample chamber by an optical fiber. The fluorescence emitted upon excitation is collected at the right angle using another optical fiber and then transmitted to the fluorescence spectrometer which utilizes an array detector. The array detection, as a key factor in process analytical chemistry, made the fluorescence spectrometer suited for multiwavelength detection of the fluorescence spectrum of the analytes. After optimization of the experimental parameters, the system has been successfully employed for sensitive determination of four fluoroquinolone antibiotics such as ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin. The linear dynamic ranges of four fluoroquinolones were between 0.25 and 20 μg·mL-1, and the detection limit of the method for ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin were 81, 36, 35, and 93 ng·mL-1, respectively. Finally, the proposed system is carried out for determination of fluoroquinolones in some pharmaceutical formulations.
Related Concept Videos
Atomic Fluorescence Spectroscopy
Fluorescence and Phosphorescence: Instrumentation

