Effect of passive wing pitching on flight control in a hovering model insect and flapping-wing micro air vehicle

Jinjing Hao1, Jianghao Wu1, Yanlai Zhang1

  • 1School of Transportation Science and Engineering, Beihang University, Beijing, People's Republic of China.

Related Concept Videos

Absolute Motion Analysis- General Plane Motion01:24

Absolute Motion Analysis- General Plane Motion

Visualize a drone, with its propellers spinning rapidly, hovering mid-air. The fascinating movements and operations of this drone can be comprehended by applying the principle of general plane motion.
As the drone's propellers rotate, an upward force is generated that counteracts the force of gravity, enabling the drone to lift off from the ground. This initial movement of the drone is along a straight path, representing a form of translational motion. In this phase, every point on the...
320
Lift01:23

Lift

Lift is a fundamental aerodynamic force that acts perpendicular to the direction of airflow. It plays a central role in achieving and sustaining flight and in stabilizing various vehicles. Lift primarily originates from pressure differences created across surfaces, such as an airfoil. A lower pressure region forms above the wing, while a higher pressure region forms below it, generating an upward force. This differential results from the shape and orientation of the airfoil, enabling the wing...
279
Determination of Pi Terms01:15

Determination of Pi Terms

The Buckingham Pi theorem is a valuable method in dimensional analysis, reducing complex relationships between variables into dimensionless terms. Relevant variables in analyzing the lift force on an airplane wing include lift force, air density, wing area, aircraft velocity, and air viscosity. Expressing each variable in terms of fundamental dimensions — mass, length, and time — provides a consistent foundation for constructing these dimensionless terms.
The theorem indicates that...
388
Hydrostatic Pressure Force on a Plane Surface01:04

Hydrostatic Pressure Force on a Plane Surface

When a plane surface is submerged in a fluid, hydrostatic forces develop on the surface due to the fluid's pressure. For horizontal surfaces, the pressure exerted by the fluid is uniform because the depth remains constant. The resultant force is determined by the pressure at the given depth multiplied by the area of the surface, and it acts through the centroid of the surface. For vertical surfaces, the pressure varies with depth, increasing as the distance from the fluid's free surface...
788
Feedback control systems01:26

Feedback control systems

Feedback control systems are categorized in various ways based on their design, analysis, and signal types.
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
517
Equation of Motion: General Plane motion - Problem Solving01:16

Equation of Motion: General Plane motion - Problem Solving

Consider a lawn roller with a mass of 100 kg, a radius of 0.2 meters, and a radius of gyration of 0.15 meters. A force of 200 N is applied to this roller, angled at 60 degrees from the horizontal plane. What will be the angular acceleration of the lawn roller?
The friction between the roller and the ground is characterized by two coefficients. The static friction coefficient is 0.15, while the kinetic friction coefficient is 0.1. These values are crucial in understanding the interaction between...
285