Related Experiment Video
Updated: Sep 27, 2025

Evaluation of an Exclusive Spur Dike U-Turn Design with Radar-Collected Data and Simulation
Published on: February 1, 2020
Chip Design of an All-Digital Frequency Synthesizer with Reference Spur Reduction Technique for Radar Sensing
1Bachelor Program in Industrial Projects, National Yunlin University of Science and Technology, Douliu 640301, Taiwan.
Abstract:
5.2-GHz all-digital frequency synthesizer implemented proposed reference spur reducing with the tsmc 0.18 µm CMOS technology is proposed. It can be used for radar equipped applications and radar-communication control. It provides one ration frequency ranged from 4.68 GHz to 5.36 GHz for the local oscillator in RF frontend circuits. Adopting a phase detector that only delivers phase error raw data when phase error is investigated and reduces the updating frequency for DCO handling code achieves a decreased reference spur. Since an all-digital phase-locked loop is designed, the prototype not only optimized the chip dimensions, but also precludes the influence of process shrinks and has the advantage of noise immunity. The elements of novelties of this article are low phase noise and low power consumption. With 1.8 V supply voltage and locking at 5.22 GHz, measured results find that the output signal power is -8.03 dBm, the phase noise is -110.74 dBc/Hz at 1 MHz offset frequency and the power dissipation is 16.2 mW, while the die dimensions are 0.901 × 0.935 mm2.
Related Concept Videos
Upsampling
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Design Example
Reconstruction of Signal using Interpolation
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
Sampling Theorem

