Characterization and comparison of smokeless powders by on-line two-dimensional liquid chromatography

Smokeless powders (SPs) are one of the most commonly used propellants for ammunition but can also be abused as energetic material in improvised explosive devices (IEDs) such as pipe bombs. After a shooting or explosion, unburnt or partially burnt particulates may be observed which can be used for forensic investigation. SPs comprise mainly nitrocellulose (NC) and additives. Therefore, the characterization of both NC and the additives is of significant forensic importance. Typically, the identification, classification, and chemical profiling of smokeless powders are based exclusively on the analysis of the additives. In this study, information regarding the NC base component was combined with the chemical analysis of the additives using two-dimensional liquid chromatography (2D-LC). The system combines size-exclusion chromatography (SEC) and reversed-phase liquid chromatography (RPLC) in an on-line heart-cut 2D-LC configuration. In the first dimension, the NC is characterized by its molecular-weight distribution (MWD) while being separated from the additives. The additives are then transferred to the second-dimension separation using a novel analyte-transfer system. In the second dimension, the additives are separated to obtain a detailed profile of the low-molecular-mass compounds in the SP. With this approach, the MWD of the NC and the composition of the additives in SP have been obtained within an hour. A discrimination power of 90.53% was obtained when studying exclusively the NC MWD, and 99.47% for the additive profile. This novel combination enables detailed forensic comparison of intact SPs. Additionally, no extensive sample preparation is required, making the developed method less labor intensive.