Separation of p-xylene and m-xylene by simulated moving bed chromatography with MIL-53(Fe) as stationary phase

The separation of p-xylene (PX) and m-xylene (MX) isomers with near boiling points is a worldwide problem. The metal-organic framework material is an ideal stationary phase for chromatographic separation because of its high porosity, homogeneous pore diameter and good chemical stability. In this paper, a simulated moving bed (SMB) chromatography system with MIL-53(Fe) as the stationary phase and petroleum ether-dichloromethane as the mobile phase was designed to separate PX and MX at ambient temperature. Firstly, according to the elution curves of a single column, nonlinear competitive Langmuir adsorption isotherm equation was confirmed by equilibrium dispersive chromatography model. Then, the SMB separation zone was determined based on triangle theory, and the SMB operating conditions were optimized. Finally, the purity, recovery and productivity of PX reached 100.0%, 99.1% and 93.1 g/L/h, respectively; the purity, recovery and productivity of MX reached 96.4%, 100.0% and 23.5 g/L/h, respectively; the solvent consumption was 0.42 L/g.