Related Experiment Video
Updated: Sep 21, 2025

Nanofabrication of Gate-defined GaAs/AlGaAs Lateral Quantum Dots
Published on: November 1, 2013
Investigation on Capacitance Collapse Induced by Secondary Capture of Acceptor Traps in AlGaN/GaN Lateral Schottky
Haitao Zhang1,2, Xuanwu Kang1, Yingkui Zheng1
1High-Frequency High-Voltage Device and Integrated Circuits Center, Institute of Microelectronics of Chinese Academy of Sciences, Beijing 100029, China.
Abstract:
In this study, a dedicated dynamic measurement system was used to investigate the transient capacitance and recovery process of AlGaN/GaN lateral Schottky barrier diodes (SBDs). With the consideration of acceptor traps in the C-doped buffer, the C-V characteristics and transient capacitance were measured and analyzed, and the results were simulated and explained by Silvaco TCAD (technology computer aided design). The ionization of acceptor traps and the change of electric potential were monitored in transient simulation to investigate the origin of the capacitance collapse in the SBD. The results suggest the significant impact of traps in the GaN buffer layer on the capacitance collapse of the device, and the secondary capture effect on the variation of acceptor ionization. Based on the study of transient capacitance of SBD, this work could be extended to the Miller capacitance in high electron mobility transistor (HEMT) devices. Moreover, the report on the stability of capacitance is essential for GaN devices, and could be further extended to other aspects of device research.
More Related Videos
Related Concept Videos
Schottky Barrier Diode
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Diode: Reverse bias
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...

