Adaptive-observer-based consensus tracking with fault-tolerant network connectivity of uncertain time-delay nonlinear
1School of Electrical and Electronics Engineering, Chung-Ang University, 84 Heukseok-Ro, Dongjak-Gu, Seoul 06974, South Korea.
Abstract:
In this study, a distributed output-feedback design approach for ensuring fault-tolerant initial network connectivity and preselected-time consensus tracking performance is proposed for a class of uncertain time-delay nonlinear multiagent systems (TDNMSs) with unexpected actuator and communication faults. It is assumed that time-varying state delays and system nonlinearities in TDNMSs are unknown. The main contribution of this study is to provide a delay-independent output-feedback control strategy to address a fault-tolerant initial connectivity preservation problem in the consensus tracking field. A local delay-independent adaptive state observer using neural networks is designed for each follower, and the boundedness of local observation errors is proved by constructing a Lyapunov-Krasovskii functional and adaptive tuning laws. Then, the local nonlinear relative output errors using a time-varying function with a preselected convergence time are derived to design simple local delay-independent trackers. The stability of the proposed consensus tracking system is analyzed, and simulation comparison results demonstrate the validity of the proposed strategy.
Related Concept Videos
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
BIBO stability of continuous and discrete -time systems
To determine the BIBO stability, the convolution integral is utilized when a bounded continuous-time input is applied to a Linear Time-Invariant (LTI) system....
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Propagation of Uncertainty from Systematic Error
Multi-input and Multi-variable systems
In the absence...


