Temperature-insensitive and fabrication-tolerant coarse wavelength division (de)multiplexing on a silica platform...

Wavelength division (de)multiplexing (WDM) device is a crucial component for optical transmission networks. In this paper, we demonstrate a 4 channel WDM device with a 20 nm wavelength spacing on silica based planar lightwave circuits (PLC) platform. The device is designed using an angled multimode interferometer (AMMI) structure. Since there are fewer bending waveguides than other WDMs, the device footprint is smaller, at 21 mm × 0.4 mm. Owing to the low thermo-optic coefficient (TOC) of silica, a low temperature sensitivity of 10 pm/°C is achieved. The fabricated device exhibits high performance of an insertion loss (IL) lower than 1.6 dB, a polarization dependent loss (PDL) lower than 0.34 dB, and the crosstalk between adjacent channels lower than -19 dB. The 3 dB bandwidth is 12.3∼13.5 nm. Moreover, the device shows a high tolerance with a sensitivity of central wavelength to the width of multimode interferometer < 43.75 pm/nm.