Gravity-based focusing and size-dependent separation of metal microparticles in lubricating oil

The separation of wear microparticles in lubricating oil is crucial for improving the accuracy and throughput of the subsequent detection. However, there are few kinds of research on the separation of high-density metallic microparticles in high-viscosity lubricating oil. In this paper, a passive method for separating the metallic microparticles in oil is proposed. Gravity sedimentation was adopted to realize three-dimensional (3D) focusing of the particle by using an inclined capillary. The gravity-based 3D focusing made the sheath flow no longer responsible for the particle focusing and effectively reduced the sheath flow. Then, the separation of different-sized metallic microparticles was achieved in a horizontal channel with the aid of a sheath flow based on the different driving forces. The present method solved the problem of nonsynchronous separation of the particle in comparison to the traditional methods. This device has a simple structure with high separation efficiency, and it is easy to integrate with the detection channel. The influence of numerous parameters on the gravity-based focusing and separation was systematically studied by the numerical simulation and the experiment. The design criteria were established, which is useful in designing and employing the device, expanding its application to other non-neutral buoyancy particle separation cases, and opening up more prospects for microfluidic technology.