Millimeter-Wave and Short-Range Wireless Communication Antenna Based on High-Conductivity Graphene-Assembled Film

Millimeter-wave and short-range wireless communication is an important part of the Internet of Things due to its advantages of high transmission speed and large data capacity. In this paper, two antenna arrays operating at typical millimeter-wave bands (45 and 60 GHz) based on graphene-assembled films (GAF) are proposed for short-range wireless communication application. The 45 GHz graphene-assembled film antenna array is in the form of a magnetoelectric dipole antenna with a strip slot coupling to achieve bidirectional radiation, which offers an operating bandwidth of 40-49.5 GHz with a realized gain of 11.8 dBi. The 60 GHz graphene-assembled film antenna utilizes a microstrip discontinuous radiation array to achieve radiation with an operating bandwidth of 59-64 GHz, reaching the peak realized gain of 14.92 dBi over the working frequency. Finally, we proposed an experimental validation to verify the transmission performance of both antenna arrays in an actual conference room. The results show that the signal drops slowly in the room with drop rates of 0.064 dB/cm (at 45 GHz) and 0.071 dB/cm (at 60 GHz), while it steeply dropped through the wall with the drop rates of 2.3 and 3.13 dB/cm, more than 35-fold difference in signal drop rates in the room and through the wall. It has been confirmed that the proposed antenna arrays can successfully realize fast indoor short-range wireless communication while also preventing signal leakage through walls, thereby enhancing the security of information. In summary, this is the first time that we have applied graphene-based materials to millimeter-wave and short-range wireless communications, revealing the significant potential of carbon-based materials in high-frequency communication systems.