Calcium silicate/gelatin composite scaffolds with controllable degradation behavior: Fabrication and evaluation

Calcium silicate can be used as an excellent material for biodegradable bone scaffolds because it can provide bioactive ions to promote bone regeneration. However, the brittleness and rapid degradation of calcium silicate scaffolds have significantly limited their clinical application. In this work, the calcium silicate scaffolds printed by DLP technology were immersed in a gelatin solution under high vacuum condition to obtain calcium silicate/gelatin composite scaffolds with good mechanical and biological properties. Then, genipin was used as a cross-linker for gelatin to control the degradation properties of the composite scaffolds. The initial compressive strength and toughness of the composite scaffolds were 5.0 times and one order of magnitude higher than those of the pure calcium silicate scaffolds, respectively. The gelatin on the surface of the scaffolds could effectively act as a protective layer to regulate the degradation behaviors of the calcium silicate substrate through controlling the crosslinking degree of the gelatin. After degrading for 14 days, the composite scaffolds at 1.0 % genipin concentration exhibited the highest compressive strength of 8.6 ± 0.8 MPa, much higher than that of the pure ceramic scaffold (1.5 ± 0.3 MPa). It can be found that the toughness of the composite scaffolds were almost over 13.2 times higher than that of the pure ceramic scaffold during degradation, despite the higher toughness loss for the former. Furthermore, the composite scaffolds showed enhanced cell biocompatibility and viability. These results demonstrate that the calcium silicate/gelatin composite scaffolds can be a promising candidate in bone tissue regeneration.